ALUCOBOND® A2

Non- combustible

Low weight, high rigidity

Perfect flatness

Large variety of colours

Weatherproof

Can easy to be folded and bent

Prefabricated panel

ALUCOBOND® A2 is  the only non-combustible aluminium composite material used in architecture world wide.Due to its mineral-filled core ALUCOBOND® A2 meets the strictest fire regulations, while fullymaintaining all the of the building’s design.

ALUCOBOND® A2, as indeed all the products of the ALUCOBOND®  family, allows simple processing, it’s impact-resistant, breakproof and weatherproof, and above all, non-combustible.

ALUCOBOND® PLUS

Fire retardant

Low weight, high rigidity

Perfect flatness

Large variety of colors

Weatherproof

Vibration-dampening

Can easy be folded and bent

Prefabricated panels

ALUCOBOND® PLUS has been developed exclusively for the requirements of the fire regulations in architecture. Due to its mineral-filled core ALUCOBOND® Plus meets the higher requirements of the fire classifications. it is hardly inflammable and offers all the proven product properties of the ALUCOBOND® family, Such as flatness, formability, resistance to weather and simple processing.

ALUCOBOND® PE

Low weight, high rigidity

Perfect flatness

Large variety of colors

Weatherproof

Vibration-dampening

Can easy be folded and bent

Prefabricated panels

ALUCOBOND® PE is a lightweight composites material consisting of two aluminium cover sheets and an internal special core. It has been developed as a rigid and at the same time flexible fascia material for architecture. ALUCOBOND® PE is extremely weatherproof, impact-resistant and break-proof, vibration dampening, and ensures easy and fast installation. All painted panels are supplied with a protective peel-off foil. The versatile ALUCOBOND® product is a material also preferred in areas other than architecture such as image- building corporate design.

ALUCOBOND® family’s advantages —— Impressive strength to weight

ALUCOBOND® family’s advantages —— High quality coil coating

The fully automated coil coating process is computer controlled throughout all the stages.

Coating quality is tested according to the standards established by the ECCA ( European Coil Coating Association)of which 3A Composites GmbH in Germany is a member.

The long-term durability of coatings can be compared by measuring:

 

Color change

 

Gloss retention

 

Chalking

 

The superiority of Ultra – cote UV resistant lacquer systems (PVDF)is shown in the three graphs.

The values indicated are taken from tests conducted by the American Coil Coating Association (NCCA) on lacquered

which were exposed to the extreme climatic conditions of South Florida for several years.

ALUCOBOND® family’s advantages —— High formbility and easy to process

A major feature of ALUCOBOND®  is the possibility to shape panels using a very simple technique called the routing and folding method.

Low investment cost

Simple fabrication technique

Flexibility in creating shapes

ALUCOBOND® Product Advantages

3AC Frame 90 System

(Patent NO.: ZL 2006 3 0166451.9)

 

In this system, the ALUCOBOND® sheets are encased in an extruded aluminium fame by means of rear-applied structural sealant. These cassettes are then fixed to main frame in either vertical or horizontal directions by extruded cleats and stainless steel screws. The frame has a 5mm exposed edge around the ALUCOBOND® sheets, and may be coloured to match the ALUCOBOND®  finish.

3AC Hook-on System

(Patent NO.: ZL 2006 3 0166446.8)

 

The ALUCOBOND® Hook-on System is an open-joint rear ventilated system with vertical panel layout. Aesthetically pleasing, the system fulfills and satisfies the Architect’s quest for a cladding system with concealed fixing. Unique in its fixings system, which facilitates un-impeded movements of the elements in all aspects, as well as allowing the joint widths between the panels to be as narrow as 6mm.

3AC Cover Strip Joint System

(Patent NO.: ZL 2006 3 0166448.7)

 

This system is one of the most adaptable systems for facade cladding with either vertical or horizontal panel layout. Individual panels are of a tray/cassette type, with four sides folded and framed with extruded aluminium profile sections. Individual elements are fastened to an extruded aluminium sub-structure by means of aluminium profiled cleats, which in turn are anchored to the wall. Typical horizontal and vertical joints between the panels are minimum 15mm wide and all rivets, fastening cleats and screws are concealed within it and kept closed by a profiled strip of matching or contrasting colour.

3AC SZ-20 System

(Patent No.: ZL 2006 3 0166450.4)

 

This system of assembly is based on the ‘tongue and groove’ principle, and particularly suited for facade cladding with horizontal panel layout. Individual panels are folded into a tray, and the top and bottom sides grasped by an extruded aluminium section. The ‘Z’ and ‘S’ profiles are riveted to the top and bottom folded edge of the panels respectively, facilitating the ‘tongue and groove’ assembly. The vertical folded edges are riveted with the ‘S’ profiles that facilitate fixing with aluminium profiled cleats to the ‘Hat’ profiled sub-structure. All the rivets, fastening cleats and screws are concealed within the panels.

Specifications of ALUCOBOND®